3M SFKC01-CN1 Shower Filter 沐浴過濾器




最大處理水量:  50,000L
最高水流量:    8L/min
適用水温: 攝氏5-50度 / 最大水壓:125psi
產品喉牙規格: ½吋英制螺紋
產地: 中國
普通花灑的最大流量為5.8升/分鐘, 沐浴水温約38度左右, 花灑軟管接口為1/2英制螺紋
減低水中的氯氣 超過百份之五十,以減少氯氣對人體的影響

此產品為原廠行貨貨品, 3M 香港 提供保養


Q: 3M沐浴過濾器壽命有多長?
A: 最大處理水量為50,000公升。因為每個客戶的沐浴習慣也不同而導致使用時間也不一樣。假設客人為2人家庭,每人每日無間斷開水沐浴15分鐘,在最大流速每分鐘8公升下,一整年365天的用水量為: 2 x 15 x 8 x 365 = 87,600公升。(大概能用6-7個月)因為沐浴過濾器精密度為50微米,物理過濾到比教粗的砂粒,固此不能用水流速快慢而判斷濾芯壽命。

Q: 3M沐浴過濾器為何只過濾50%的氯氣?不能設計至過濾更多百份比嗎?
A: 3M沐浴過濾器採用KDF物料過濾水中的氯氣,而因為在產品設計上,顧及每個客戶的沐浴需要,即是:
– 水流速夠快 (不能太慢)
– 處理水量夠大 (不想太頻密更換濾芯)
– 必須能過濾最高攝氏50度熱水 (很多人仍然需要沖熱水浴)
– 產品不佔用太多位置,節省空間
– 自行安裝及更換濾芯,快捷方便

Q: 3M沐浴過濾器能自行安裝嗎?
A: 3M沐浴過濾器採用1/2”吋喉牙,在香港的沐浴潔具,絕大部份都是這制式,只需鬆開花洒軟喉,再將3M沐浴過濾器與花洒軟喉及出水口連上,扭緊就可以安裝完成。


<Maximum treatment water volume: 50,000L
<Maximum water flow: 8L/min
<Applicable water temperature:
5-50 degrees Celsius / maximum water pressure: 125psi
<Product throat specifications: ½ inch inch thread
<made in China
<The maximum flow rate of the ordinary shower head is 5.8 liters/minute,
the bath water temperature is about 38 degrees, and the shower hose interface is 1/2 inch thread
<Reduce the chlorine in the water by more than 50% to reduce the impact
of chlorine on the human body

This product is an original licensed product, 3M Hong Kong provides warranty

Bath filter Q&A

Q: How long is the life of the 3M shower filter?
A: The maximum treated water volume is 50,000 liters. Because each customer’s bathing habits are also different, the use time is also different.
Assuming that the guest is a family of 2 people, each person is bathed without interruption for 15 minutes per day. At the maximum flow rate of
8 liters per minute, the water consumption for 365 days a year is: 2 x 15 x 8 x 365 = 87,600 liters. (It can be used for about 6-7 months)
Because the bath filter has a precision of 50 microns, and it physically filters to coarser sand, it is impossible to judge the life of the filter
element by the speed of the water flow rate.

Q: Why does the 3M shower filter only filter 50% of the chlorine? Can’t it be designed to filter more percentages?
A: 3M bath filter uses KDF material to filter the chlorine in the water, and because the product design takes into account the bathing needs of each customer, it is:
-The water flow rate is fast enough (not too slow)
-The amount of treated water is large enough (do not want to replace the filter element too frequently)
-Must be able to filter hot water up to 50 degrees Celsius (many people still need a hot bath)
-The product does not take up too much space and saves space
-Install and replace the filter element by yourself, which is quick and convenient
Therefore, based on the above application considerations, the product design and performance can be compromised while reducing the chlorine
by more than 50% and reducing the irritation of chlorine to the skin and hair.

Q: Can the 3M shower filter be installed by itself?
A: The 3M shower filter uses 1/2″ throat. Most of the bath sanitary ware in Hong Kong are of this standard. You only need to sprinkle the soft throat,
then use the 3M shower filter and the shower hose. Connect the water outlet and tighten it to complete the installation.
The top cover of the 3M shower filter can be rotated 360 degrees. If the distance between the water outlet and the bathtub (or other objects) is too close,
the top can be rotated to make more room for installation.